[Geology2] LIDAR technology helps to map landslides

LIDAR technology helps to map landslides

Published 29 November 2010

Researchers use Light Detection and Ranging (LIDAR) to identify and accurately measure changes in coastal features following a catastrophic series of landslides that occurred in New Zealand in 2005; the findings are important for assessing geological hazards and reducing the dangers to human settlements

Southampton University scientists have used Light Detection and Ranging (LIDAR) to identify and accurately measure changes in coastal features following a catastrophic series of landslides that occurred in New Zealand in 2005.

"Our findings are important for assessing geological hazards and reducing the dangers to human settlements," said Professor Jon Bull of the university's School of Ocean and Earth Science, based at the National Oceanography Centre, Southampton.

"LIDAR uses the time taken for reflected light to return from objects or surfaces to determine their range, in a similar manner to radar. It can be used to monitor coastal evolution, and to identify and precisely measure landform changes resulting from geological events such as landslides," said Ph.D. student Helen Miller, who worked on the research project.

Information was collected from the small coastal town of Matata, located on the Bay of Plenty at the northern end of New Zealand's North Island, which was struck by devastating debris flows in May 2005.

The debris flows were liquefied landslides of water-saturated material including boulders, logs and other debris that swept away cars and buildings.

They resulted from torrential rain that triggered widespread landslides in the catchments of the Awatarariki and Waitepuru streams in the steeply rising hills behind the town.

The material eventually spilt out along the coast where it settled to form a large fan-like sediment deposit. To help understand the complex pattern of sediment deposition, the researchers compared information obtained before and after the 2005 event.

Based on LIDAR, eye-witness accounts, field investigations, and aerial photographic surveys, the researchers estimate that debris flows from the Awatarariki stream transported at least 350,000 cubic meters of debris.

The researchers were able to map the sediment flow paths, along with changes caused by the clear-up operation and the creation of man-made levees after the event. Their observations show that the final shape of the debris fan, as well as spatial differences in make-up and consistency, were largely influenced by existing physical features such as sand dunes.

"The use of LIDAR for debris flow hazard analysis is still in its early days, but it has the advantage of giving a synoptic view over a large area," said Professor Bull. "Ours is one of the first studies using 'before and after' comparisons of LIDAR data to assess changes in coastal morphology."

Source
http://homelandsecuritynewswire.com/lidar-technology-helps-map-landslides

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___